Today I am setting up my own Bitcoin immersion mining farm, this is liquid cooled BTC mining, which allows for higher Bitcoin mining profitability, and spending less electricity mining earning more passive income! How easy is the DCX enclosure and dry cooler install? I’ll show you lol! Start mining yourself today here – https://voskco.in/tailsxch
Learn more about DCX immersion mining options – https://voskco.in/dcx
VoskCoin Mining Farm Tour video playlist – https://youtube.com/playlist?list=PL4dnwHTjcf-8SXMDAoL7-XFkV6b4XUH3j&si=BD6oDOgXluoXOvnM
Buy your own Bitcoin miners here – https://voskco.in/am
Altair Tech PDUs and BTC ASIC parts – https://voskco.in/altair
Evergreen plug and play low power miners! https://voskco.in/evg
Use code VOSKCOIN to save some COIN!
I have toured some crazy Bitcoin immersion mining farms over the years and thanks to DCX I am finally going to start immersion mining Bitcoin myself! DCX has a plug and play immersion mining setup, they have options for single phase electricity and three phase electricity, in this video I am installing DCX immersion mining kit in my single-phase bitcoin mining farm. I also use Braiins s19 firmware which supports immersion mining because I did not have fan spoofers which are needed to when Bitcoin ASIC mining rigs are running in a liquid without fans. While this isn’t a step by step installation guide, hopefully this helps anyone feel more comfortable doing a DCX immersion mining farm build. If you have questions just leave a comment and I’ll try and check back and help with what I learned setting up my own liquid cooled immersion bitcoin mining deployment!
Contact BMA Enterprises crypto division here – https://voskco.in/bma
⏰ Timestamps ⏰
00:00 Setting up the immersion bitcoin mining shed
00:40 Immersion mining is crazy Quiet!
02:25 Make sure your miners are clean before you immerse them!
03:27 Installing a different firmware on the Bitmain s19
05:37 Installing the DCX dry cooler
07:49 Manually Pumping the coolant
09:31 Using shrouds on the Bitcoin miners
11:00 Pouring the immersion fluid into the DCX immersion tank!
12:46 Turning on and opening al the valves
14:06 Powering the Immersion setup
15:22 Using the Altair pdu
17:14 Fixing bad miners
18:00 How is my wire management?
19:50 Installing the new Altair PDU’s
22:37 Should you immersion mine at home?
25:25 Using a transformer for electricity
26:11 Get connected with the community!
27:00 Thanks to BMA for helping!
28:06 Immersion mining is nice and quiet!
29:40 Make it happen!
Follow us on our official social media accounts – https://voskco.in/23
VoskCoin is for entertainment purposes only and is never intended to be financial investment advice. VoskCoin owns or has owned cryptocurrency and associated hardware. VoskCoin may receive donations or sponsorships in association with certain content creation. VoskCoin may receive compensation when affiliate/referral links are used. VoskCoin is home of the Doge Dad, VoskCoin is not your Dad, and thus VoskCoin is never liable for any decisions you make.
#Bitcoin #BTC #PassiveIncome #VoskCoin #immersion #dcx #bitmain #antminer #bitcoins #mining #miningfarm #workfromhome #miner #mine
27 Comments
The install was buttery except getting covered in antifreeze!
The lesson learned was that those hose clamps should probably only be used once and then discarded. I think the bolt stretches enough to weaken it – the whole system is about 30PSI/2Bar.
Vosk your not supposed to cross streams! Congrats!
So Sick!!!
6:52 o mosquito entrou no nariz?
so cool live to see the stat efficiency comparison of 8 dry vs. wet miners.
I use my hot fluid to heat my shop and wife’s sewing shop. Just add bypass loop and run the hot fluid through a heater coil. Just curious what’s your average fluid temp? And how much TH are you getting?
Ohh forgot to tell you a heated my hoses up with a heat gun then pushed them on. I also used a bucket of super hot water to expand the hose a little before sliding them on but heat gun is best!!
Government should charge you carbon tax
Seriously: you have puffed everyone into Chia and still you are not discussing FLEXPOOL closure .
would love to see some comparison numbers between the liquid cooled and air cooled asics
whats the power consumption? lower? 😀 uk power is so expensive but maybe water cooling may change that?
Super cool! Can't wait for the solar.
Great video, trading come with a lot of benefits And I have just bought my first house through it. As a beginner I was scared of Loosing my savings but I'm glad I took the bold step that is now favoring me.
Nice…curious about underground immersion benefits? Underground wine cellars are always nice and cool.
Hey dude- found a property in TN with a natural gas well on it. Any advice on who I can tall to to see if the well produces enough gas to run at least 10 S19jPros?
All I can say bad ass setup 👍🏾💯 🫡 bro 😎
NICE!
6:16 not to code, should have drilled next to the stud, sleeved with pvc, strap said pcv to stud and then pass connections and silicone afterwards
Cool, destroying the planet performing silly tasks. This has to be one of the dumbest ideas that human beings have come up with in decades.
What would you think it would cost to build one of these currently
it's only too late until the price triples 🤣 and then they'll be real silent all of a sudden
I hope you all values investing in bitcoin
Every time I see immersion systems I always want to know about filtration. It's nice and clean now and there is a cover, but every spec of dust that hits that fluid stays in that fluid and after a couple years your exchange cooler is going to be holding all that dust inside it and it will be impossible to remove. I would have liked to see a filtration unit for the fluid going to the cooler.
@ 6:54 min in a fly flew in your nose and you didnt notice? or was that just me… please watch it and someone make a meme!
pop the hose end into hot water for a minuit 🙂
Easy work, tighten when warm !
Please I need to contact, how am going to get you
Well, finaly you got it, cheers. Recommended DCX in your comments section many moons ago 😉